Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Compass cutter 10 - 150mm 6 spare blades

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Mini drills 10 st. 0.3-3.0 mm

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Digital Caliper - 150mm 0.01mm

Machinist Square Size ca.68x102mm

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

Sandpaper file 100/180 grit curved Side 1: 100 grit Side 2: 180 grit 19mm wide 5mm thick with foam filling Approx. 18cm long.

Hole Punch Set - 5 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Sizes: 3-4-5-6-8mm

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Scriber set - 4 pieces Different shapes hooks

Hobby knife #1 with 1 blade Durable aluminium bitt. Good Quality

Needle files set 100mm mini Diamond- 5pcs.

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Hobby Line Engraver for making panel lines (seams) in plastic

Hobby knife #2 (Large) with 1 blade Durable aluminium bitt. Good Quality

Diamond files Special shapes Set 10 pcs.

Center Punch Set 1/32 Inch 1/16 Inch 3/32 Inch

Rotating platform 25 cm

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini