Mitre box aluminium - Premium Quality For metal saws and precision saws.

Drill Set 0.30 mm - 1.60 mm - HSS 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic dispenser

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Diamond files Special shapes Set 10 pcs.

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Professional Scalpel Holder no. 5A (3) Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade.

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Reamer Conical 0-14mm

Cutting Mat din A2 (600x450mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality

Professional Scalpel handle no.3 Swann Morton (without blade)

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Grip tool Holds small objects by itself

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Mini drills 10 st. 0.3-3.0 mm