Thread cutting

5 Product(s)
Tap Wrench M1-M10

Tap Wrench M1-M10

Tap Wrench M1-M10
M1-M10
Square: 2,1-8,0mm
Lenght approx. 18 cm

€6,95
Tap Wrench Mini

Tap Wrench Mini

Tap Wrench Mini
Square: 2,1-6,0mm
Length approx. 11 cm

€5,95
Watchmakers tap set

Watchmakers tap set

Watchmakers tap set
Taps and die in the following sizes:
0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-

€8,95
Watchmakers tap set

Watchmakers tap set

Watchmakers tap set
Taps and die in the following sizes:
0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, fo

€16,95
Watchmakers tap set - M1/M1,2/M1,4/M1,6/M1,8/M2/M2.5/M3/M3.5

Watchmakers tap set - M1/M1,2/M1,4/M1,6/M1,8/M2/M2.5/M3/M3.5

Watchmakers tap set
Taps in the following sizes:
M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5
Holes should be pre-drilled 0.1-0.4mm smaller.
Taps can be clamped in a (mini) tap wrench.

€15,95
1
Please accept cookies to help us improve this website Is this OK? Yes No More on cookies »