Tools

Steel ruler 50cm, rigid


First 10cm scaled with an additional 1 / 2mm division,
Rear scaling in inches and provided with a hole for hanging.

LED lamp - daylight - 84 LEDs - WHITE

Good lighting is essential for good visibility and working with small details.

This lamp is made up of 2 rows with 42 LEDs. Both rows can be switched on and off. Furthermore, the lamp is dimmable to prevent dazz

Bending springs for tubes

For evenly bending brass, copper and tubes without kinking.

Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin.

Meth

Cutting Mat din A1 (900x600mm)
Rasterized cm2
5 ply - Heavy quality

Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Cutting Mat din A2 (600x450mm)
Rasterized cm2
5 ply - Heavy quality

Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Cutting Mat din A5 (230x190mm)
Rasterized cm2
5 ply - Heavy quality

Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Cutting Mat din A4 (300x220mm)
Rasterized cm2
5 ply - Heavy quality

Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm

Industry quality

Suitable for metal, plastic, wood, etc.

Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount

https://www.marks-miniatures.com

Mini Cross Table

Cross table made of aluminum, adjustable dovetail guide, millimeter scale on the table, moving spindle cover, incl. Clamping set.

Smooth crank rotation thanks to ball-bearing spindle.

Table area: 330 x 95 mm with 3 T-slots 8 mm.

Mini table saw.

- for wood, plastic and non-ferrous metals
- Guidance at 90 °
- Adjustable guidance 0 - 180 °
- Including HSS saw blade
- Automatic protective cover for the saw blade
- Saw blade: Ø 60 mm, bore 8 mm, thickness 0.8 mm, 60 teeth
- C

Precision hand vice

One side has a horizontal and vertical groove for clamping round materials.

With sturdy wooden handle (hexagon) for good grip.

Jaw width: 10mm

Usable jaw depth: 18mm

Max. Opening: 14mm

G Clamp 50mm Metal

Watchmakers tap set
Taps in the following sizes:
M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5
Holes should be pre-drilled 0.1-0.4mm smaller.
Taps can be clamped in a (mini) tap wrench.

Mini drill press vice / Machine vice

Manufactured from milled and ground steel

- Very little chance of damage to workpiece due to smooth finish

- Equipped with horizontal and vertical grooves for clamping round shapes.

- Clamping Jaw width: 40

Mini drill press vice / Machine vice

Made from industrial plastic, solid construction.
Rotating parts made of metal

- Very little chance of damage to the workpiece due to plastic construction

- Made in United Kingdom

- Clamping Jaw width: 45

Parallel clamp 50mm

Can apply pressure to your workpiece along its entire length, or aimed at a specific point.

Total length of the jaw: 50mm
- Usable jaw length: 20mm (the part of the jaw that is in front of the spindles)
- Clamping range in the

Center finder
Dimensions 80x50mm
For locating the center of round and square shapes. For example, the center of a bar stock

Mini Bench Drill Press

Can also be used as a milling machine.

Speed is both stepwise and variable (steppless) adjustable:

0-8,000 RPM

0-11,000 RPM

0-18,000 RPM

Ideal for processing plastics, wood, metal, etc.

A common problem with dri

Mini milling, engraving and drilling machine - Battery-Rechargeable USB

Very handy machine. Speed ​​is adjustable 5,000 - 10,000 - 15,000 R.P.M. and therefore extremely suitable for scale modelling and fine working.

Ideal for processing plastics, wo

Modelling Wax Hard
Extremeley low oil concentration (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc.

Hard variant - Suitable for small

Modelling Wax soft.
Oil free wax (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc.

Soft Variant - only suitable for small fillings

T

Hobby Rivet Maker
for making rivet impressions in plastic

With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Hobby Line Engraver

for making panel lines (seams) in plastic

Bench hook with miter box

The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html

Mater