Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Needlefile Handpiece

Needle file set - 3 Pcs.

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Needle files set 100mm mini Diamond- 5pcs.

Diamond files Special shapes Set 10 pcs.

Diamant Feile

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Nylon Brush for cleaning various surfaces

Brass Brush for cleaning various surfaces

Steel Brush for cleaning various surfaces

Diamond Reamer

Polishing File - Mini 1200/1600 grit approx. 9cm long

scraping-knife For scaping and deflash plastics and metals.

scraper/knife

Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Polishing File - 1200/1400/1600 grit approx. 18cm long

Sandpaper file - 100/180 grit approx. 18cm long

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wo