Products tagged with Tool

Mini drills 10 st. 0.3-3.0 mm

Watchmakers tap set
Taps in the following sizes:
M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5
Holes should be pre-drilled 0.1-0.4mm smaller.
Taps can be clamped in a (mini) tap wrench.

Glass fibre cleaning pin

For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates.

In plastic modelling used to sand over applied glue on models.
When in use, only the tip of the...

Miter cutter

Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc.

Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened)

Dimension: 210mm x 210mm

Cutting length blad

Watchmakers tap set
Taps and die in the following sizes:
0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, fo

Mini milling, engraving and drilling machine - Battery-Rechargeable USB

Very handy machine. Speed ​​is adjustable 5,000 - 10,000 - 15,000 R.P.M. and therefore extremely suitable for scale modelling and fine working.

Ideal for processing plastics, wo

Bending springs for tubes

For evenly bending brass, copper and tubes without kinking.

Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin.

Meth

Diamond Burs + diamond disks - 25 parts

18 Diamond Burs
5 diamond disks (metal)
2 Holders
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm

Industry quality

Suitable for metal, plastic, wood, etc.

Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount

https://www.marks-miniatures.com

Nail press 2mm / 3mm
A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place.
Make your choice:
Blue - for

Scriber set - 4 pieces
Different shapes hooks

Diamond Burs - 30 pieces in box

Base thicknes 3mm

Ideal for Proxxon, Demel and comparable machines.

Drill Set 0.30 - 1.60mm - HSS - titanium

Titanium coated. Better for drilling metals, last longer.

20 HSS drills in sizes:
0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60

Packed in plastic...

Watchmakers tap set
Taps and die in the following sizes:
0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-

Mini Machinist Square

Size ca.20x25mm

Drill set 2.35 mm Shank

0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Mini Compressor

Single piston oil-free compressor Mini is equipped with the air reservoir (pressure vessel) and the regulator of the output pressure of the filter and manometer (pressure gauge).
Great advantage of this compressores is that it has a pr

Lead wire 0.2mm - 1.0mm
Ideal for scratch building various electrical wires in cockpits, hydraulic hoses in wheel wells, pipework around engines, brake lines, avionics data cabling, ignition leads, etc. Easy to bend and keeps its shape. Approx. 12-15 str

Mini Glueclamp

Max. opening 11cm

can also clamp from the inside to the outside, see last picture

Hand drill with chuck and rotating base

For drills from 0.3 - 2.5 mm

Mini drill press vice / Machine vice

Manufactured from milled and ground steel

- Very little chance of damage to workpiece due to smooth finish

- Equipped with horizontal and vertical grooves for clamping round shapes.

- Clamping Jaw width: 40

Hand vice - opens rotated

Vice: Steel Width of Jaws:15mm
Handle: Wood
Max. Opening: 10mm

Hand vice opens the jaws when rotated
Serrated haws with a vee
Hollowed Handle to feed longer material trough the handle to the vice

Modelling Supplies needle files 10 pieces

Set files, 10 pieces different shapes

Fine Files
Standard Quality

Length: 140 mm

Precision hand vice

One side has a horizontal and vertical groove for clamping round materials.

With sturdy wooden handle (hexagon) for good grip.

Jaw width: 10mm

Usable jaw depth: 18mm

Max. Opening: 14mm