Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Tin snips To cur thin metal sheets and photo etch.

Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Needle nose pliers straight fine

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Machinist Square with stop Size ca.50x75mm

Needle nose pliers bent fine

scraping-knife For scaping and deflash plastics and metals.

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Diamond Burs  cylinder round - 20 pcs. 5 x Ø 1.5 mm 5x Ø 2,0 mm 3 x Ø 2.5 mm 3 x Ø 3.0 mm 2 x Ø 3.5 mm 1.x Ø 4,5 mm 1 x Ø 5.0 mm Base thicknes 2,35mm Ideal for Proxxon, Dremel and comparable machines.

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Tweezer Slanted narrow point - flat closure - Stainless Steel / anti magnetic  Material: Stainless Steel Premium Quality Material: Stainless Steel Premium Quality

scraper/knife with handle

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Scriber set - 4 pieces Different shapes hooks

Professional Scalpel handle no.4 Swann Morton (without blade)

scraper/knife