Mitre box For small tubes and rods 45 and 90 degree sawing with adjustable stop

Lead wire 0.2mm - 1.0mm Ideal for scratch building various electrical wires in cockpits, hydraulic hoses in wheel wells, pipework around engines, brake lines, avionics data cabling, ignition leads, etc. Easy to bend and keeps its shape. Approx. 12-15 stra

Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Diamond Burs - 30 pieces in box Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Diamond Burs + diamond disks - 25 parts 18 Diamond Burs 5 diamond disks (metal) 2 Holders Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Rotatable lens holder - Glasses arms can be replaced by a headband - Interchangeable lens

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Hand drill with chuck and rotating base For drills from 0.3 - 2.5 mm

Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Rotating platform 25 cm

Drill Set 0.30 mm - 1.60 mm - HSS 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic dispenser

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Hand drill with rotating base Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes) When drilling, the other collet is stored inside the shaft.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long