Mini drills 10 st. 0.3-3.0 mm

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Grip tool Holds small objects by itself

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Tin snips To cur thin metal sheets and photo etch.

Hobby knife set Durable aluminium holder and aluminium bitt. With a Magnet on the back side for safely lifting blades with 6 different blades and a plastic box. Good Quality

Polishing wheel set - 4 pcs. 3 cloth polishing wheels; 25mm diameter. 1 holder, Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Needle files set 100mm mini Diamond- 5pcs.

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Mini Machinist Square Size ca.20x25mm

Fret saw set, fret saw set: fret saw table and G-clamp

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself