Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Machinist Square with stop Size ca.50x75mm

Polishing wheel set - 4 pcs. 4 polishing wheels; 20mm diameter. 1x Thick Leather, 1x Thin Leather, 1x Fabric, 1x Sponge Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Brass Brush for cleaning various surfaces

Hammer Nylon/Brass Hammer with nylon and brass head

Rivetting Hammer Steel Standard hammer

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml

scraper/knife with handle

Hammer Rubber/Steel Hammer with rubber and steel head

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Tweezer support / holder clamp Adjustable support, for cross tweezers

Saw help for tubes and rods

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Professional Scalpel handle no.4 Swann Morton (without blade)

Nylon Brush for cleaning various surfaces

Hand drill with spring Chrome For drills from 0.3-1,0mm

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Scriber used for marking metals and plastics. also usable as center punch