Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Mini open end- and ring spanner set 3.2mm / 4mm / 5mm / 5.5mm / 6mm / 7mm / 8mm / 9mm /10mm Thin version, 1.6mm thick.

Diamond tapered file set # 180, # 260, # 360 • 12-piece tapered diamond file set includes: - Grit 180: 8 mm, 6 mm, 4 mm, 3 mm flat file - Grit 260: 8 mm, 6 mm, 4 mm, 3 mm flat file - Grit 360: 8 mm, 6 mm, 4 mm, 3 mm flat file • Length: 18 cm • Thickness:

Mini clamp

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Hobby knife #2 (Large) with 1 blade Durable aluminium bitt. Good Quality

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Mini drills 10 st. 0.3-3.0 mm

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Circlip pliers 2x 180º 1x 90º 1x 45º

Mini clamp

Rotating platform 25 cm

Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Fret saw set, fret saw set: fret saw table and G-clamp

Mini Handvice Opening: 0.4-1.0 mm

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Precision Cutter

Colle 21 Epoxy glue - 2 component glue. In handy tube for equal dosage. Mix the 2 parts together well. Sticks in 20-30 seconds. Full curing in a few hours. Widely applicable adhesive Good adhesive strength Waterproof Resistant to temperature changes Sui

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material: