- Magnifiers (13)
- Paint and glue accessories (11)
- Files and sanding paper (37)
- Cutting acessoiries (13)
- Cutting Tools (19)
- Tweezers (20)
- Pliers (26)
- Drills, Bitts, Rotary Tools (50)
- (21)
- Measure and marking (28)
- Clamps and vices (39)
- Bending and forming (8)
- Hammers and punches (13)
- Lighting (8)
- Reamers (6)
- Scissors (20)
- Screwdriver (7)
- Soldering (10)
- Shaping Tools (17)
- Cleaning (4)
- Woodworking (8)
- Airbrush (29)
- Thread cutting (6)
- Decal equipment (2)
- Clay modelling (37)
Products tagged with Minitool
Milliput Superfine - White
Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool
Miter cutter
Miter cutter
Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc.
Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened)
Dimension: 210mm x 210mm
Cutting length blad
Masking Tape
Masking Tape
Acid free, leaves no glue residue
Length: 18 meter
Available sizes:
1mm
2mm
3mm
6mm
10mm
Diamond Burs + diamond disks - 25 parts
Diamond Burs + diamond disks - 25 parts
18 Diamond Burs
5 diamond disks (metal)
2 Holders
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.
Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm
Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm
Industry quality
Suitable for metal, plastic, wood, etc.
Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount
https://www.marks-miniatures.com
Milliput Standard - Yellow / Grey
Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool
Blades for Hobby knifes and scalpel blades
Blades for Hobby knifes and scalpel blades
Packed per 5 Pieces
Choose from drop-down list:
Hobby knife #1:A1, A2, A3, A4, A5
Hobby knife #2:B1, B2, B3, B4, B5
Scalpel handle 3&7:10,10A, 11, 12, 15
Scalpel handle 4:20
Glue 'n' Glaze - Crystal Clear - for glueing transparant windows
Glue 'n' Glaze - Crystal Clear - for glueing transparant windows
For making crystal clear windows and bonding canopies and most plastics
Bonds wood, plastic, metal, painted surfaces. For glazing windows up to 6mm. Use with micro-tips.
Glue 'N' Gl
Nail press 2mm / 3mm
Nail press 2mm / 3mm
A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place.
Make your choice:
Blue - for
Razorblade Saw
Razorblade saw
Ultra thin about 0.13mm thick razor saw.
Set consists of a handle with 2 saw blades.
Every saw blade has a fine and ultra fine toothing.
Cuts plastic, resin, wood, and soft metals.
Humbrol Maskol
Humbrol Maskol
Humbrol Maskol is a liquid. when dried it looks like a kind of rubber film. This allows you to easily protect parts of your model when you are going to paint or for example want to apply camouflage. It is recommended not to leave the dried
Handsaw
Handsaw
Choose:
- Saw handle
- Small blade
- Medium blade
- Large blade = usable with mitre box
Colle 21 anaerobic cyanoacrylate glue - 21 gram
Colle 21 anaerobic cyanoacrylate glue - 21 gram
COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure made (15 to 45 seconds) wil
Diamond Burs - 30 pieces in box
Diamond Burs - 30 pieces in box
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.
Miter sanding aid - angle sanding
Miter sanding aid - angle sanding
The angle can be adjusted.
The handpiece has a slide (stop).
Comes with a set of 3 extra sanding belts:
150 Grid
240 Grid
320 Grid
Sanding belt set is also available separately.
Ideal for profiles in styrene, wo
Mini nutdriver 1.5mm / 2.0mm / 2.5mm / 3.0mm / 4.0mm / 5.0mm/ 5.5mm
Mini nutdriver
Please choose your size:
1.5mm
2.0mm
2.5mm
3.0mm
4.0mm
5.0mm
5.5mm
Triangle screwdriver bit set 1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm
Triangle screwdriver bit set
1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm
often used to remove base plates from scale model cars
Mini Allen Key Screwdriver 1.5mm / 2.0mm / 2.5mm / 3.0mm
Mini Allen Key Screwdriver
Please choose your size:
1.5mm
2.0mm
2.5mm
3.0mm
Precision hand vice
Precision hand vice
One side has a horizontal and vertical groove for clamping round materials.
With sturdy wooden handle (hexagon) for good grip.
Jaw width: 10mm
Usable jaw depth: 18mm
Max. Opening: 14mm