Diamond Burs - 30 pieces in box Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Colle 21 - Debonder21 Solvent for Cyanoacrylate Super Glue Adhesive The ideal product for cleaning and loosening superglue / cyanoacrylate adhesives. Instructions 1. Apply a few drops of Debonder 21 to the surfaces to be cleaned using the supplied brush

Doming punch set with doming block 12 doming punches in the sizes: 2.3 - 3.5 - 4.3 - 5.1 - 5.9 - 6.7 - 7.5 - 8.3 - 9.1 - 9.9 - 10.7 - 11.5mm. Manufactured from hardened tool steel Doming block: Manufactured from hardened and polished tool steel

Colle 21 - BLACK - anaerobic cyanoacrylate glue - 21 gram COLLE 21 Black – Super glue with precision nozzle for the application. Ideal for natural rubber, metal, ceramic, wood, leather, cardboard and plastic (excl. PE, PP, PTFE) the main advantage o

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Rotatable lens holder - Glasses arms can be replaced by a headband - Interchangeable lens

Photo Etched parts Bender (Large) with 4 bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 79mm x 162mm

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Hand drill with chuck and rotating base For drills from 0.3 - 2.5 mm

Mini open end- and ring spanner set 3.2mm / 4mm / 5mm / 5.5mm / 6mm / 7mm / 8mm / 9mm /10mm Thin version, 1.6mm thick.

Diamond Burs + diamond disks - 25 parts 18 Diamond Burs 5 diamond disks (metal) 2 Holders Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Professional Scalpel Holder no. 5A (3) Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade.

Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Spare Blade - Razorblade Saw Ultra thin about 0.13mm thick razor saw. With fine and ultra fine teeth. Spare blade for https://www.marks-miniatures.com/en/razorblade-saw.html

Gorila Glue Epoxy glue Gorilla takes epoxy to a new level. The Gorilla level. Gorilla Epoxy gives an incredibly strong long-term adhesion. For household, professional, automotive and boat repairs. The two-part filling formula easily bonds and fills bonds

Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Triangle screwdriver bit set 1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm often used to remove base plates from scale model cars

Mini nutdriver set 3.0 / 3.5 / 4.0 / 4.5 / 5.0mm

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Circlip pliers 2x 180º 1x 90º 1x 45º

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me