Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Mini open end- and ring spanner set 3.2mm / 4mm / 5mm / 5.5mm / 6mm / 7mm / 8mm / 9mm /10mm Thin version, 1.6mm thick.

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Third hand base with magnifier 90mm LED For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x with LED light Completely adjustable.

Applicator Micro Brush Select your choice

Digital Caliper - 150mm 0.01mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Diamond files Special shapes Set 10 pcs.

Mini quick release clamp Can be used with 1 hand Tighten with elastic band. Maximum opening: 50mm Made from industrial quality plastic. Made in UK

Photo Etched parts Bender (Large) with 4 bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 79mm x 162mm

Xuron Photo Etch Scissor

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Rotating platform 25 cm

Colle 21 Dense - anaerobic cyanoacrylate glue - 20 gram Dense: the thicker version of the normal Colle21. works better with porous materials. COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your asse

Plier tweezernose

Rubber block For punching and cutting Size: 50x50x25 mm

Precision mechanics screwdriver set, 9-part Torx Slotted / Phillips PH precision screwdriver set, 9 pcs. in a practical storage map. Ideal for all professionals in the fields of precision mechanics, electronics, jewelry production, optics. Enables precis

Tin snips To cur thin metal sheets and photo etch.

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Diamond reamer / file set - 4 pcs: • Diamond coated points - 150 grid • Plastic handle, Handle length: 7cm • Assorted colors • Used for filing, grinding and shaping beads made of ceramic, plastic, glass, tile, gold, stone, metal, carbide, wood, etc. • Id

Colle 21 - Debonder21 Solvent for Cyanoacrylate Super Glue Adhesive The ideal product for cleaning and loosening superglue / cyanoacrylate adhesives. Instructions 1. Apply a few drops of Debonder 21 to the surfaces to be cleaned using the supplied brush