Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Mini drill press vice / Machine vice Manufactured from milled and ground steel - Very little chance of damage to workpiece due to smooth finish - Equipped with horizontal and vertical grooves for clamping round shapes. - Clamping Jaw width: 40 mm. -

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

scraping-knife For scaping and deflash plastics and metals.

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Needle nose pliers bent fine

Professional Scalpel Holder no. 5A (3) Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade.

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Machinist Square with stop Size ca.50x75mm

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Mini paint roller 25mm With 15 cm long plastic handle

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Fret saw set, fret saw set: fret saw table and G-clamp

Nylon Brush for cleaning various surfaces

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Warding file set - 5 Pcs. Length without handle 100 mm. Total length 170 mm. Contents: flat, round, square, triangle en halfround.