Needle file set - 3 Pcs.

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Mitre box aluminium For metal saws and precision saws.

Polishing wheel set - 4 pcs. 3 cloth polishing wheels; 25mm diameter. 1 holder, Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Mini Machinist Square Size ca.20x25mm

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Brass Vice

Hole Punch Set - 5 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Sizes: 3-4-5-6-8mm

Hand drill with spring For drills from 0.3-1,0mm

Polishing File - 1200/1400/1600 grit approx. 18cm long

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Diamond Burs  cylinder round - 20 pcs. 5 x Ø 1.5 mm 5x Ø 2,0 mm 3 x Ø 2.5 mm 3 x Ø 3.0 mm 2 x Ø 3.5 mm 1.x Ø 4,5 mm 1 x Ø 5.0 mm Base thicknes 2,35mm Ideal for Proxxon, Dremel and comparable machines.

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Modelling pencil - silicon tip 5 pcs. Choose from: Medium density - 3mm tip (grey) Medium density - 6mm tip (grey) High density - 3 mm tip (black)

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Machinist Square Size ca.70x100mm

Machinist Square Size ca.68x102mm