Hand drill with spring For drills from 0.3-1,0mm

Polishing wheel set - 4 pcs. 3 cloth polishing wheels; 25mm diameter. 1 holder, Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Drill press vice 65mm Manufactured from high quality aluminum Width: 65mm Jaw height: 20mm Total height: 52 mm Dimensions without crank: 125 x 125 mm The holes fit exactly on our mini bench drill press: https://www.marks-miniatures.com/en/mini-bench

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Machinist Square with stop Size ca.50x75mm

Needle nose pliers straight fine

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Masking Tape Acid free, leaves no glue residue Length: 18 meter Available sizes: 1mm 2mm 3mm 6mm 10mm

Degree Protractor

Professional Scalpel handle no.4 Swann Morton (without blade)

Degree Protractor and center finder tool

scraping-knife For scaping and deflash plastics and metals.

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Mini Anvil

Mini Punch Set 0.50mm 0.75mm 1.00mm 1.25mm

Machinist Square Size ca.70x100mm

Straight edge ruler 50mm

Spring divider large For circles up to 31,5cm