Fret saw set, fret saw set: fret saw table and G-clamp

Brass vice

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Nylon brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Modeling spatula 20cm No. 31 Wooden modeling spatula. Used for clay cutting, smoothing, contouring and pattern decoration Available in 21 designs

Saw and grinding disc holder with wide head Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 8mm wide head for extra support of the saw blade / grinding disc

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Scriber set - 4 pieces Different shapes hooks

Mini clamp on stick

Scriber used for marking metals and plastics. also usable as center punch

Hammer Nylon/Brass Hammer with nylon and brass head

Polishing wheel set - 4 pcs. 3 cloth polishing wheels; 25mm diameter. 1 holder, Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Wire Loop cutter 50cm. For cutting clay

Circular saw blade for wood and plastic. Diameter: 22mm Thickness: 0.3mm Fixing hole: 1.7mm

Spare soldering tip for Soldering Station D12-1 Choose from soldering tip: 1 Fine 2 Medium 3 Large

Machinist Square 100x200mm with Waterruler

Degree Protractor

Sawblade for hobby knife #1

Inspection Mirror

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Lomer Nr.5 19x3cm Used for clay cutting, smoothing, contouring and pattern decoration. Can be used both as a hand shaping and turning tool. Available in 5 versions

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.