Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Rotatable lens holder - Glasses arms can be replaced by a headband - Interchangeable lens

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

Diamond files Special shapes Set 10 pcs.

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Soldering Station 48 Watt, 160-480? Changeable Bit

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Mini Machinist Square Size ca.20x25mm

Rotating platform 25 cm

Mini drills 10 st. 0.3-3.0 mm

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Circular saws mini - 6pcs Ideal for Proxxon, Dremel, etc.

Mitre box aluminium - Premium Quality For metal saws and precision saws.

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long