Mini drills 10 st. 0.3-3.0 mm

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Circlip pliers 2x 180º 1x 90º 1x 45º

Rotating platform 25 cm

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Fret saw set, fret saw set: fret saw table and G-clamp

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

LED lamp - daylight - 84 LEDs - WHITE Good lighting is essential for good visibility and working with small details. This lamp is made up of 2 rows with 42 LEDs. Both rows can be switched on and off. Furthermore, the lamp is dimmable to prevent dazzling

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

scraping-knife For scaping and deflash plastics and metals.

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Airbrush Minifilter - 1/8 inch in-line Pistol Grip Filter

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Mini Wire stripper and cutter

Sable brush, 3 sizes 0, 00 or 000

Hobby knife set Durable aluminium holder and aluminium bitt. With a Magnet on the back side for safely lifting blades with 6 different blades and a plastic box. Good Quality

Airbrush hose 1/8" - 1.8M / 3.0M / 5.0M Flexibel airbrush hose, connection on both sides 1/8 inch. Please choose your length 1.8 Meter 3 Meter 5 Meter

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Airbrush Holder model with clamp The airbrush holder may be used as a clamp model to fit tightly with the included table clamp. You can place up to 4 airbrushes to the default setting. The table clamp is fitted with a special bracket which gives you th

Needle files set 100mm mini Diamond- 5pcs.

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Spare Blade - Razorblade Saw Ultra thin about 0.13mm thick razor saw. With fine and ultra fine teeth. Spare blade for https://www.marks-miniatures.com/en/razorblade-saw.html