Hand drill / vice For drills from 0.3 - 1.0mm

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

Airbrush Minifilter - 1/8 inch in-line Pistol Grip Filter

Airbrush needle 0,2mm, 0,3mm, 0,5mm Please choose your size

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Machinist Square Size ca.50x75mm

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Machinist Square with stop Size ca.50x75mm

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Spare Blade - Razorblade Saw Ultra thin about 0.13mm thick razor saw. With fine and ultra fine teeth. Spare blade for https://www.marks-miniatures.com/en/razorblade-saw.html

Airbrush 3 way splitter 1/8" Makes it possible to attach multiple hoses (and airbrushes) to a compressor

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Modelling pencil - silicon tip 5 pcs. Choose from: Medium density - 3mm tip (grey) Medium density - 6mm tip (grey) High density - 3 mm tip (black)

Degree Protractor and center finder tool

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Mini drills 10 st. 0.3-3.0 mm

Fret saw set, fret saw set: fret saw table and G-clamp

Professional Scalpel handle no.4 Swann Morton (without blade)

Hammer Nylon/Brass Hammer with nylon and brass head

Airbrush connector: male thread G1/8 - male thread G1/8

Cleaning brush set For cleaning tubes/channels Ideal for airbrush cleaning. The set consists of 3 flexible cleaning wires and 3 flexible brushes