Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Airbrush hose 1/8" - 1.8M / 3.0M / 5.0M Flexibel airbrush hose, connection on both sides 1/8 inch. Please choose your length 1.8 Meter 3 Meter 5 Meter

Photo Etch Pencil Has a slightly sticky tip, to pick and place small parts without shooting away. If the tip is not sticky or sharp anymore it can be scharpened with a regular pencil sharpener.

Degree Protractor

Professional Scalpel handle no.4 Swann Morton (without blade)

Degree Protractor and center finder tool

scraping-knife For scaping and deflash plastics and metals.

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Mini Anvil

Mini Punch Set 0.50mm 0.75mm 1.00mm 1.25mm

Machinist Square Size ca.70x100mm

Spring divider large For circles up to 31,5cm

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

scraper/knife with handle

Mini Tweezer straight 8cm - narrow tips With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality

Sculpting tool set Sturdy sculpting tools with loops in various shapes. Suitable for removing excess material or for hollowing out. Total length: 12 cm.

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Fret saw set, fret saw set: fret saw table and G-clamp

Digital Caliper - 150mm 0.01mm

Machinist Square Size ca.50x75mm

Machinist Square Size ca.68x102mm