Brass Brush for cleaning various surfaces

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips Material: Stainless Steel Premium Quality

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Fret saw set, fret saw set: fret saw table and G-clamp

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Tweezer Bent Tips - Stainless Steel Material: Stainless Steel Premium Quality

Hammer Rubber/Steel Hammer with rubber and steel head

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Sandpaper file 100/180 grit curved Side 1: 100 grit Side 2: 180 grit 19mm wide 5mm thick with foam filling Approx. 18cm long.

Cleaning brush set For cleaning tubes/channels Ideal for airbrush cleaning. The set consists of 3 flexible cleaning wires and 3 flexible brushes

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Japan spatula set, 4 pieces, plastic Set with 4 flat spatulas with the widths 5cm, 8cm, 10cm, 12cm.

Machinist Square Size ca.50x75mm

Hand drill / vice For drills from 0.3 - 1.0mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Knife pen form 4 mm with 1 blade

Tweezer straight narrow Tips - Stainless Steel / anti magnetic Material: Stainless Steel Premium Quality

Machinist Square with stop Size ca.50x75mm

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Degree Protractor

Scalpel handle no.4 (without blade)