Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Grip tool Holds small objects by itself

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Wax modeling device / Mini soldering device (photo etch) 100 to 450 degrees Celsius Comes with 2 points. - Mini soldering tip: Ideal for fine soldering. As for example Photo Etch, electronics, smd, etc. - Special wax point. This point is flat. As a result

Airbrush with 0.2 - 0,3 and 0.5mm needle/nozzle and hose Fine airbrush, double action, equipped with adjustable needle stop and solid 7 ml. metal paintcup. Suitable for very fine to medium detail work. The kit comes with mounted nozzle and needle 0.3mm a

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Soldering Station 48 Watt, 160-480? Changeable Bit

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Mini Wire stripper and cutter

Digital Caliper - 150mm 0.01mm

Needle files set 100mm mini Diamond- 5pcs.

Spare soldering tip for Soldering Station D12-1 Choose from soldering tip: 1 Fine 2 Medium 3 Large

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

LED DESK LAMP WITH MAGNIFYING GLASS 3 + 12 DIOPTRE -DAYLIGHT - 5W - 48 LEDS - WHITE Features 48 white LEDs on/off switch dioptre: 3 + 12 table standard electronic ballast Specifications colour: cold white number of LEDs: 48 (not replaceable) intensity le

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm