Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Airbrush quick joint 1/8" Usable between the airbrush and the airbrush hose Please choose your Airbrush Quick Joint with or without an air regulator

Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Drill Set 0.30 mm - 1.60 mm - HSS 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic dispenser

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini

Wax modeling device / Mini soldering device (photo etch) 100 to 450 degrees Celsius Comes with 2 points. - Mini soldering tip: Ideal for fine soldering. As for example Photo Etch, electronics, smd, etc. - Special wax point. This point is flat. As a result

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Airbrush with 0.2 - 0,3 and 0.5mm needle/nozzle and hose Fine airbrush, double action, equipped with adjustable needle stop and solid 7 ml. metal paintcup. Suitable for very fine to medium detail work. The kit comes with mounted nozzle and needle 0.3mm a

Razorblade saw Ultra thin about 0.13mm thick razor saw. Set consists of a handle with 2 saw blades. Every saw blade has a fine and ultra fine toothing. Cuts plastic, resin, wood, and soft metals.

Humbrol Model Filler Fills hairline cracks and crevices between plastic parts. The product can be processed with a fine sandpaper once it is completely dry, and painted over. For use on plastic model kits. Apply the product directly to the subject wit

Airbrush nozzle 0,2mm, 0,3mm, 0,5mm Please choose your size

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Rotatable lens holder - Glasses arms can be replaced by a headband - Interchangeable lens

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Photo Etched parts Bender (Large) with 4 bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 79mm x 162mm

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Glue Applicator 12 Pcs. For a precise application of cyanoacrylate glue. (cyanoacrylate glue not included)

Holder for holding airbrushing objects with 6 clips Practical holder for gripping models while you paint at six points. In the base there are two pipes in a double-rotating body. In these tubes are mounted terminals inside which is flexible copper wire c

Airbrush with 0.2 - 0,3 and 0.5mm needle/nozzle and hose Fine airbrush, double action, equipped with adjustable needle stop and solid 5 ml. metal paintcup. Suitable for very fine to medium detail work. The kit comes with mounted nozzle and needle 0.3mm a

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality