Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

Ruler - metal Scale: mm and inch Reach: 15,5 cm / 6 inch

Tin snips To cur thin metal sheets and photo etch.

Mini drills 10 st. 0.3-3.0 mm

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Hobby Line Engraver for making panel lines (seams) in plastic

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

scraper/knife with handle

Gorilla Glue - 60 ml PRODUCT FEATURES 100% WATERPROOF: Doesn’t break down when exposed to outdoor elements VERSATILE: Easily bonds wood, stone, metal, ceramic, foam, glass, concrete and much more! INCREDIBLY STRONG: Expands 3 times into the material

Spring divider large For circles up to 31,5cm

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Fret saw set, fret saw set: fret saw table and G-clamp

Machinist Square 100x200mm with Waterruler

Polishing File - 1200/1400/1600 grit approx. 18cm long

Machinist Square Size ca.68x102mm

Professional Scalpel handle no.4 Swann Morton (without blade)

Inspection Mirror

Brass Brush for cleaning various surfaces

Scriber used for marking metals and plastics. also usable as center punch