Hand drill with spring For drills from 0.3-1,0mm

Universal holder/plier 9,5cm - curved For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Rivetting Hammer Steel Standard hammer

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

scraper/knife with handle

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Scriber used for marking metals and plastics. also usable as center punch

Brass Brush for cleaning various surfaces

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Tweezer support / holder clamp Adjustable support, for cross tweezers

Fret saw set, fret saw set: fret saw table and G-clamp

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips under small angle Material: Stainless Steel Premium Quality

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Carbide steel bur - Arch pointed nose 3,2x38mm Industry Quality Ideal for Proxxon, Dremel and comparable machines with a 3,2mm collet

Machinist Square 100x200mm with Waterruler

Polishing File - 1200/1400/1600 grit approx. 18cm long

Machinist Square Size ca.57x77mm