Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Professional Scalpel handle no.3 Swann Morton (without blade)

Hand drill with spring For drills from 0.3-1,0mm

Scriber set - 4 pieces Different shapes hooks

Hand drill / vice For drills from 0.3 - 1.0mm

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Tin snips To cur thin metal sheets and photo etch.

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

6-piece rubber polishing burr set Rubber polishing points for finishing and for polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. To be used with Proxxon, Dremel and other milling machines. Width of the tips approx. 6mm. Cont

Fret saw set, fret saw set: fret saw table and G-clamp

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Inspection Mirror

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Machinist Square with stop Size ca.50x75mm