Diamond Burs + diamond disks - 25 parts 18 Diamond Burs 5 diamond disks (metal) 2 Holders Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Drill Set 0.30 mm - 1.60 mm - HSS 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic dispenser

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Rotatable lens holder - Glasses arms can be replaced by a headband - Interchangeable lens

Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Diamond Burs - 30 pieces in box Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Mitre box For small tubes and rods 45 and 90 degree sawing with adjustable stop

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.

Hand drill with chuck and rotating base For drills from 0.3 - 2.5 mm

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Mini drills 10 st. 0.3-3.0 mm

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Hobby Line Engraver for making panel lines (seams) in plastic

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Professional Scalpel Holder no. 5A (3) Swann Morton - Retractable Includes 5 blades 10A (Compatible with all blades that fit a standard no.3 holder) This scalpel holder is retractable, which provides extra safety when you are not using the blade.