Triangle screwdriver bit set 1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm often used to remove base plates from scale model cars

Single blade nipper Premium cutting pliers, very thin. Only for plastic up to 3mm. Has a sharp and a flat side so that parts can be cut out of the sprue with high precision

Tweezer support / holder clamp Adjustable support, for cross tweezers

Mini Anvil Double horn anvil for precision work. Excellent quality. hardened. Widely used by watchmakers, jewelers and hobbyists.

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

Watchmakers tap set Taps and die in the following sizes: 0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-rota

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Spare soldering tip for Soldering Station D12-1 Choose from soldering tip: 1 Fine 2 Medium 3 Large

Solder tin wire - 0.5 mm, lead free Sn 99.3 Cu0.7 - Rosin Core 10 gram

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Solder tin wire - 1mm 60/40 Rosin Core 17 gram

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

Saw help for tubes and rods

Photo Etch Pencil Has a slightly sticky tip, to pick and place small parts without shooting away. If the tip is not sticky or sharp anymore it can be scharpened with a regular pencil sharpener.

Flat brush

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Fretsaw blades 12 pcs - Wood, Plastics, Metall Price per 12 pcs Suitable for Wood, Plastics and Metall Available in different sizes, please see table. Please choose your size 4 = Coarse 3 2 1 1/0 = Fine 2/0 3/0 4/0 5/0 6/0 = Superfine Size 1/0 till 6/

Wax modeling device / Mini soldering device (photo etch) 100 to 450 degrees Celsius Comes with 2 points. - Mini soldering tip: Ideal for fine soldering. As for example Photo Etch, electronics, smd, etc. - Special wax point. This point is flat. As a result

Plier round nose

Mini clamp on stick

Clamp

Machinist Square with stop Size ca.50x75mm