6-piece grinding disc set - approx. 1 mm wide. Resin bonded aluminum oxide grinding wheels for cutting, grinding and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other milling machines. Content

7-piece rubber grinding discs set - slightly abrasive Rubber grinding wheels for cleaning and polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. Can be used on Proxxon, dremel and other milling machines. Disc size 3.2x22mm Con

9-piece grinding disc set Silicon carbide grinding wheels, with a width of 3mm, for sharpening, grinding, deburring, rust removal and sanding, etc. Can be used on metal, alloys, ceramics, tiles, stone, glass, plastic, fiberglass and wood. Compatible with

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Pressure regulator and moisture separator for compressor The gauge indicates the operating pressure of the airbrush. To adjust the pressure, pull the knob upwards, then it can be turned. Turn clockwise to increase pressure; turn counterclockwise to decrea

Airbrush Minifilter - 1/8 inch in-line Pistol Grip Filter

Airbrush needle 0,2mm, 0,3mm, 0,5mm Please choose your size

Airbrush nozzle 0,2mm, 0,3mm, 0,5mm Please choose your size

Airbrush connector: internal thread 1/8 - male thread M5

Airbrush connector: internal thread 1/8 - male thread G1/4

Airbrush connector: internal thread 1/4 - male thread G1/8

Airbrush connector: male thread G1/8 - male thread G1/4

Airbrush connector : internal thread M5 - male thread G1/8

Airbrush 3 way splitter 1/8" Makes it possible to attach multiple hoses (and airbrushes) to a compressor

Airbrush quick joint 1/8" Usable between the airbrush and the airbrush hose Please choose your Airbrush Quick Joint with or without an air regulator

Airbrush hose 1/8" - 1.8M / 3.0M / 5.0M Flexibel airbrush hose, connection on both sides 1/8 inch. Please choose your length 1.8 Meter 3 Meter 5 Meter

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Scriber set - 4 pieces Different shapes hooks

Carbide steel bur - Arch pointed nose 3,2x38mm Industry Quality Ideal for Proxxon, Dremel and comparable machines with a 3,2mm collet

Microscale Micro Sol - Decalfluïd Micro Sol setting solution is for the most difficult irregular surfaces to be found on models. It completely softens the Microscale Decal, allowing it to drape down onto the surface of the model, conforming perfectly to

Microscale Micro Set - Decalfluïd Micro Set is a very versatile decal setting solution that does several things to Microscale Decals to improve application. Micro Set should be applied to the surface of the model where you will be sliding the decal off t

Humbrol Maskol Humbrol Maskol is a liquid. when dried it looks like a kind of rubber film. This allows you to easily protect parts of your model when you are going to paint or for example want to apply camouflage. It is recommended not to leave the dried