Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Saw and grinding disc holder Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 5mm wide head

Saw and grinding disc holder with wide head Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 8mm wide head for extra support of the saw blade / grinding disc

Circular saw blade for wood and plastic. Diameter: 32mm Thickness: 0.3mm Fixing hole: 1.7mm

Circular saw blade for wood and plastic. Diameter: 22mm Thickness: 0.3mm Fixing hole: 1.7mm

G Clamp 50mm Metal

Mini Tube cutter / Pipe cutter 1.5-15mm To shorten copper and brass tubes / pipes. 

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

Watchmakers tap set Taps in the following sizes: M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5 Holes should be pre-drilled 0.1-0.4mm smaller. Taps can be clamped in a (mini) tap wrench.

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Modelling Wax Hard Extremeley low oil concentration (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc. Hard variant - Suitable for small an

Modelling Wax soft. Oil free wax (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc. Soft Variant - only suitable for small fillings This w

Sawing aid for tubes - Razorblade saw saw aid for 0.13mm thick razor saws. For cutting rods and tubes With adjustable stop to be used with https://www.marks-miniatures.com/en/razorblade-saw.html

Mini miter box - Razorblade saw Miter box for 0.13mm thick razor saws. Saw in 45 degrees, 60 degrees and 90 degrees. With adjustable stop to be used with https://www.marks-miniatures.com/en/razorblade-saw.html

Spare Blade - Razorblade Saw Ultra thin about 0.13mm thick razor saw. With fine and ultra fine teeth. Spare blade for https://www.marks-miniatures.com/en/razorblade-saw.html

Razorblade saw Ultra thin about 0.13mm thick razor saw. Set consists of a handle with 2 saw blades. Every saw blade has a fine and ultra fine toothing. Cuts plastic, resin, wood, and soft metals.

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Hobby Line Engraver for making panel lines (seams) in plastic

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Precision mechanics screwdriver set, 9-part Torx Slotted / Phillips PH precision screwdriver set, 9 pcs. in a practical storage map. Ideal for all professionals in the fields of precision mechanics, electronics, jewelry production, optics. Enables precis

Precision mechanics screwdriver set, 13-part slot, Phillips cross Precision mechanics Precision screwdriver set, 13 pieces slot, Phillips cross Slotted / Phillips PH precision screwdriver set, 13 pcs. in a practical storage map. Ideal for all profession

6-piece rubber polishing burr set Rubber polishing points for finishing and for polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. To be used with Proxxon, Dremel and other milling machines. Width of the tips approx. 6mm. Cont