Needle nose pliers straight fine

Hobby knife #1 with 1 blade Durable aluminium bitt. Good Quality

Hand drill with spring For drills from 0.3-1,0mm

Mini clamp on stick

Third hand base with magnifier 90mm For precision work for wich you'll need both hands and could use 1 extra. Very usable for soldering With (glas)magnifier ca. 90 mm, magifies 2x Completely adjustable.

Mini Pipettes (7 pcs). Small pipetes, ideal for paints and fluids.

Degree Protractor and center finder tool

Circular saws mini - 6pcs Ideal for Proxxon, Dremel, etc.

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Rivetting Hammer Steel Standard hammer

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

6-piece rubber polishing burr set Rubber polishing points for finishing and for polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. To be used with Proxxon, Dremel and other milling machines. Width of the tips approx. 6mm. Cont

18-piece grinding disc set. Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines. Cutting disk is 0,6mm strong Content

Tap Wrench Mini Square: 2,1-6,0mm Length approx. 11 cm

Mini Handvice Opening: 0.4-1.0 mm

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Universal holder/plier 9,5cm - curved For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Circular saw blade for wood and plastic. Diameter: 22mm Thickness: 0.3mm Fixing hole: 1.7mm

Needle files set 100mm mini - 5 pcs. Files are 100 mm long.

Needle nose pliers bent fine