Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

scraper/knife with handle

Clay loop tool set 16 cm - 10 pieces. - premium Sturdy sculpting tool with loops in various shapes. Suitable for removing excess material or for hollowing out. Total length: approx. 16 cm

Needle nose pliers straight fine

Scriber used for marking metals and plastics. also usable as center punch

Hand drill / vice For drills from 0.3 - 1.0mm

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Hobby Line Engraver for making panel lines (seams) in plastic

scraping-knife For scaping and deflash plastics and metals.

Hammer Nylon/Brass Hammer with nylon and brass head

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Needle nose pliers bent fine

Machinist Square Size ca.50x75mm

Brass Brush for cleaning various surfaces

Machinist Square Size ca.57x77mm

Spring divider large For circles up to 31,5cm

Hand drill with spring For drills from 0.3-1,0mm

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Polishing wheel set - 4 pcs. 3 cloth polishing wheels; 25mm diameter. 1 holder, Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Machinist Square Size ca.49x53mm

Hammer Rubber/Steel Hammer with rubber and steel head

Drill set 2.35 mm shank- Titanium Coated Titanium coated. Better for drilling metals, last longer. 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Carbide steel bur - Arch pointed nose 3,2x38mm Industry Quality Ideal for Proxxon, Dremel and comparable machines with a 3,2mm collet