Curved files 10 pieces Set files, 10 pieces different shapes Ideal for hard to reach areas Length approx. 140 mm

Machinist Square Size ca.68x102mm

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Clay loop tool set 16 cm - 10 pieces. - premium Sturdy sculpting tool with loops in various shapes. Suitable for removing excess material or for hollowing out. Total length: approx. 16 cm

Scriber set - 4 pieces Different shapes hooks

Needle files set 100mm mini Diamond- 5pcs.

Hammer Nylon/Brass Hammer with nylon and brass head

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Professional Scalpel handle no.3 Swann Morton (without blade)

Brass Brush for cleaning various surfaces

Hammer Rubber/Steel Hammer with rubber and steel head

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Tin snips To cur thin metal sheets and photo etch.

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Needle nose pliers straight fine

Grip tool Holds small objects by itself

Rivetting Hammer Steel Standard hammer