Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Vice with ball joint. Due to the ball joint, the vice can be set in any desired position, which makes certain tasks easier. Jaw width: 78mm Max. opening: 55mm To be fixed with a table clamp on table tops up to 50mm thick.

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

spring clamp Maximum opening: 35 mm The clamp opens by squeezing. When released, the clamp closes automatically. Suitable for clamping different shapes. (round, square, triangle etc,)

Hand vice - opens rotated Vice: Steel Width of Jaws:15mm Handle: Wood Max. Opening: 10mm Hand vice opens the jaws when rotated Serrated haws with a vee Hollowed Handle to feed longer material trough the handle to the vice

Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Needle files set 100mm mini Diamond- 5pcs.

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Digital Caliper - 150mm 0.01mm

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Cutting Mat din A1 (900x600mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Professional Scalpel handle no.4 Swann Morton (without blade)

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Machinist Square with stop Size ca.50x75mm

Machinist Square Size ca.68x102mm

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini