Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Drill Set 0.30 - 1.60mm - HSS - titanium Titanium coated. Better for drilling metals, last longer. 20 HSS drills in sizes: 0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60 Packed in plastic...

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Needle files set 100mm mini Diamond- 5pcs.

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Universal holder/plier 13cm - straight tips For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Hobby Line Engraver for making panel lines (seams) in plastic

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Center finder Dimensions 80x50mm For locating the center of round and square shapes. For example, the center of a bar stock

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Needle nose pliers straight fine

Steel Brush for cleaning various surfaces

Brass Brush for cleaning various surfaces

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Hand vice with wing nut 130 mm Flat clamp 11mm wide. For clamping small objects

Needle nose pliers bent fine

Hand drill with spring For drills from 0.3-1,0mm

Spring divider large For circles up to 31,5cm

Hand drill with spring Chrome For drills from 0.3-1,0mm

scraping-knife For scaping and deflash plastics and metals.

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips