Products tagged with modellbau

Miter cutter

Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc.

Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened)

Dimension: 210mm x 210mm

Cutting length blad

Mini drills 10 st. 0.3-3.0 mm

Lead wire 0.2mm - 1.0mm
Ideal for scratch building various electrical wires in cockpits, hydraulic hoses in wheel wells, pipework around engines, brake lines, avionics data cabling, ignition leads, etc. Easy to bend and keeps its shape. Approx. 12-15 str

Diamond Burs - 30 pieces in box

Base thicknes 3mm

Ideal for Proxxon, Demel and comparable machines.

Mini Machinist Square

Size ca.20x25mm

Glass fibre cleaning pin

For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates.

In plastic modelling used to sand over applied glue on models.
When in use, only the tip of the...

Cross Tweezer curved on stand - heat resistant

Selfholding Tweezer. Hols small objects by itself

Hand drill with chuck and rotating base

For drills from 0.3 - 2.5 mm

Drill Set 0.30 - 1.60mm - HSS - titanium

Titanium coated. Better for drilling metals, last longer.

20 HSS drills in sizes:
0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60

Packed in plastic...

Diamond Burs + diamond disks - 25 parts

18 Diamond Burs
5 diamond disks (metal)
2 Holders
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.

Mini vise
Jaw width 40mm
Maximum opening: 30 mm
Can be mounted on the table with the screw holes.

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm

Industry quality

Suitable for metal, plastic, wood, etc.

Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount

https://www.marks-miniatures.com

Fretsaw

Fretsaw to be used to saw wood profiles, plastic and fine metals.

Drill Set 0.30 mm - 1.60 mm - HSS

20 HSS drills in sizes:
0.30-0.35-0.40-0.45-0.50-0.55-0.60-0.65-0.70-0.75-0.80-0.85-0.90-0.95-1.00-1.20-1.30-1.40-1.50-1.60

Packed in plastic dispenser

Hand drill with rotating base

Length: ca. 9cm
For drills from 0.3 - 3.0 mm

with 2 double collets (=4 different sizes)
When drilling, the other collet is stored inside the shaft.

Modelling Supplies needle files 10 pieces

Set files, 10 pieces different shapes

Fine Files
Standard Quality

Length: 140 mm

Ruler - metal - with stop

Scale: mm and inch

Reach: 15,2 cm / 6 inch

Drill set 2.35 mm Shank

0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Head magnifying glass LED + 4 lenses
magnifying: 1.2x, 1.8x, 2.5x, 3.5x
Incl. Batteries

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE

Features
light source: 12 W circular fluorescent lamp
on/off switch
table standard
dioptre: 3 + 12
Specifications
dioptre: 3 + 12 (magnification 1.75 + 4.00)
colour: whit

Hammer with 6 changeable heads

1x Flat - Synthetic
1x Flat - Brass
1x Flat - Steel
1x Rivet - Steel
1x Ball - Steel
1x Round - Steel

Ruler - metal

Scale: mm and inch

Reach: 15,5 cm / 6 inch

Magnifying glasses clip on - 2x magnification
use in cobination with normal glasses

Mitre box

For small tubes and rods
45 and 90 degree sawing with adjustable stop