Rivetting Hammer Steel Standard hammer

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Universal holder/plier For clamping thin Materials. Also usable as plier to hold parts/objects. With serrated tips

Hole Punch Set - 7 pcs Tool for making holes / disk out of sheet materials(plastic, paper, leather, metal sheet, etc.) Handpiece and hole punces in Sizes: 1,5 - 2,0 - 2,5 - 3,0 - 4,0 - 5,0 mm

Japan spatula set, 4 pieces, plastic Set with 4 flat spatulas with the widths 5cm, 8cm, 10cm, 12cm.

Saw and grinding disc holder Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 5mm wide head

Circular saw blade for wood and plastic. Diameter: 22mm Thickness: 0.3mm Fixing hole: 1.7mm

Precision mechanics screwdriver set, 13-part slot, Phillips cross Precision mechanics Precision screwdriver set, 13 pieces slot, Phillips cross Slotted / Phillips PH precision screwdriver set, 13 pcs. in a practical storage map. Ideal for all profession

Drill set 2.35 mm shank- Cobalt Cobalt drills specially for hard steel alloys. e.g. V2A (Stainless Steel) 0.6mm, 0.8mm, 1.0mm, 1.3mm, 1.5mm, 2.0mm.

Scriber used for marking plastics, wood, etc.

Degree protractor with dept gauge

Paint palete for mixing paint

Ruler - metal - with stop Scale: mm and inch Reach: 15,2 cm / 6 inch

Vice deluxe - Large Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Hammer Rubber/Steel Hammer with rubber and steel head

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Mini Tweezer curved 8cm - narrow tips With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality

Saw and grinding disc holder with wide head Shaft thickness: 2.3mm (Standard size fits most machines such as Proxxon, dremel, etc.) Screw thicknes 1.7 mm With 8mm wide head for extra support of the saw blade / grinding disc

Colle 21 anaerobic cyanoacrylate glue - GEL- 3 Gram Ideal for porous maerials COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure

Mini Punch Set 0.50mm 0.75mm 1.00mm 1.25mm

Needle file set - 3 Pcs.

Brass vice

Hand drill / vice For drills from 0.3 - 1.0mm

Polishing wheel set - 4 pcs. 4 polishing wheels; 20mm diameter. 1x Thick Leather, 1x Thin Leather, 1x Fabric, 1x Sponge Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.