Fret saw set, fret saw set: fret saw table and G-clamp

Compass cutter 10 - 150mm 6 spare blades

Digital Caliper - 150mm 0.01mm

Vice Deluxe Vice: Aluminium Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Bending tool 6.0-10.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:6.0/7.0/8.0/9.0/10.0 mm

Needle files set 100mm mini - 12 pcs. Files are 100 mm long.

Head magnifying glass LED + 4 lenses magnifying: 1.2x, 1.8x, 2.5x, 3.5x Incl. Batteries

Machinist Square Size ca.57x77mm

Scalpel handle no.3 - ergonomic handle The ergonomic handle provides more comfort and stability. (without blade)

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Airbrush holder benchtop max. 4 airbrush Excellent container for four Airbrush spray guns. The holder of the upper part is rotated 360 °, and has two different systems for the storage of airbrushes. The container is suitable for all guns. The base of th

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

LED DESK LAMP WITH MAGNIFYING GLASS 3 + 12 DIOPTRE -DAYLIGHT - 5W - 48 LEDS - WHITE Features 48 white LEDs on/off switch dioptre: 3 + 12 table standard electronic ballast Specifications colour: cold white number of LEDs: 48 (not replaceable) intensity le

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Tin snips To cur thin metal sheets and photo etch.

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Mini Pipettes (7 pcs). Small pipetes, ideal for paints and fluids.

Professional Scalpel handle no.4 Swann Morton (without blade)