Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

scraping-knife For scaping and deflash plastics and metals.

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm

Carbide steel router - Cylinder 0.5 / 1.0 / 1.5 / 2.0 / 2.5mm Industry quality Suitable for metal, plastic, wood, etc. Ideal for proxxon, dremel and other milling / drilling machines with a standard 3.2mm mount https://www.marks-miniatures.com/en/mini

Magnifying glasses clip on - 2x magnification use in cobination with normal glasses

Brass Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

Airbrush needle 0,2mm, 0,3mm, 0,5mm Please choose your size

Polishing File - 1200/1400/1600 grit approx. 18cm long

DESK LAMP WITH MAGNIFYING GLASS - DAYLIGHT - 3 + 12 DIOPTRE - 12W - WHITE Features light source: 12 W circular fluorescent lamp on/off switch table standard dioptre: 3 + 12 Specifications dioptre: 3 + 12 (magnification 1.75 + 4.00) colour: white colour

Hobby Rivet Maker for making rivet impressions in plastic With 4 different blades. Spacing between tips from approx. 0.5mm (blade A) to 1.75mm (blade D)

Airbrush Minifilter - 1/8 inch in-line Pistol Grip Filter

Machinist Square Size ca.50x75mm

Tin snips To cur thin metal sheets and photo etch.

Brass Brush for cleaning various surfaces

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Hammer Nylon/Brass Hammer with nylon and brass head

Modelling Supplies needle files 10 pieces Set files, 10 pieces different shapes Fine Files Standard Quality Length: 140 mm

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Airbrush 3 way splitter 1/8" Makes it possible to attach multiple hoses (and airbrushes) to a compressor

Machinist Square with stop Size ca.50x75mm

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Hand drill / vice For drills from 0.3 - 1.0mm