Mini Wire stripper and cutter

Rubber block For punching and cutting Size: 100x100x24 mm

Diamond files Special shapes Set 10 pcs.

Vice deluxe Vice: Aluminium Pins: 4 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:25mm Maximum opening between pins:30mm

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Hobby Line Engraver for making panel lines (seams) in plastic

Xuron Track Cutter

Hobby knife #2 (Large) with 1 blade Durable aluminium bitt. Good Quality

Xuron Vertical Track Cutter

Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Diamond tapered file set # 180, # 260, # 360 • 12-piece tapered diamond file set includes: - Grit 180: 8 mm, 6 mm, 4 mm, 3 mm flat file - Grit 260: 8 mm, 6 mm, 4 mm, 3 mm flat file - Grit 360: 8 mm, 6 mm, 4 mm, 3 mm flat file • Length: 18 cm • Thickness:

Mini paint roller 25mm With 15 cm long plastic handle

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Solder tin wire - 0.6 mm, 100 gram 60/40 Rosin Core 100 gram

Mini collet holder with 3 collets For example to hold small dills in bigger drill chucks 3 Collets: 0-0.8MM 0.8-1.5MM 1.5-2.5MM

Mini drill press vice / Machine vice Made from industrial plastic, solid construction. Rotating parts made of metal - Very little chance of damage to the workpiece due to plastic construction - Made in United Kingdom - Clamping Jaw width: 45 mm. - Cl

Bench hook with miter box The raised edge can be used as a stop for a workpiece. In the raised edges, 2 mini miter boxes are incorporated, these can be used with the middle and largest saw blade https://www.marks-miniatures.com/en/handsaw.html Material:

Single blade nipper Premium cutting pliers, very thin. Only for plastic up to 3mm. Has a sharp and a flat side so that parts can be cut out of the sprue with high precision

Mini scissors curved

Machinist Square Size ca.68x102mm

Hand Vice Deluxe Mini Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects.

Brass Vice

Rivetting Hammer Steel Standard hammer