Mini collet holder with 3 collets For example to hold small dills in bigger drill chucks 3 Collets: 0-0.8MM 0.8-1.5MM 1.5-2.5MM

Circular saws mini - 6pcs Ideal for Proxxon, Dremel, etc.

Brass brush set - 3 pcs. Straight brush Ø 5mm Disc brush Ø 22mm Cup Brush Ø 15mm Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

Mini drill press vice / Machine vice Manufactured from milled and ground steel - Very little chance of damage to workpiece due to smooth finish - Equipped with horizontal and vertical grooves for clamping round shapes. - Clamping Jaw width: 40 mm. -

Mini Glueclamp Max. opening 11cm can also clamp from the inside to the outside, see last picture

Sable brush, 3 sizes 0, 00 or 000

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Colle 21 Epoxy glue - 2 component glue. In handy tube for equal dosage. Mix the 2 parts together well. Sticks in 20-30 seconds. Full curing in a few hours. Widely applicable adhesive Good adhesive strength Waterproof Resistant to temperature changes Sui

Extra thin cement - plastic glue Glue for plastic scale model kits. Apply the glue to the parts and then hold them together. Capillary action causes the glue to draw between openings on its own. This glue dries completely within 10 minutes; comes in a 3

Xuron 90º curved pliers With smooth jaws Made in USA

Bending springs for tubes For evenly bending brass, copper and tubes without kinking. Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin. Method: S

Xuron Track Cutter

Warding file set - 5 Pcs. Length without handle 100 mm. Total length 170 mm. Contents: flat, round, square, triangle en halfround.

Circlip pliers 2x 180º 1x 90º 1x 45º

Mini Machinist Square Size ca.20x25mm

Tin snips To cur thin metal sheets and photo etch.

Bending tool 1.5-5.0mm For bending and forming from wire and metal strips/pieced(photo etch). Due sepperate sizes, you are allowed to bend repeatly with the same curve Size:1.5/2.5/3.5/4.5/5.0 mm

Drill Set 0.30 mm - 1.00 mm - HSS 15 HSS drills from 0.30mm increasing with 0.05mm till 1.00mm. Packed in pouch

Cutting Mat din A3 (450x300mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Colle 21 - Debonder21 Solvent for Cyanoacrylate Super Glue Adhesive The ideal product for cleaning and loosening superglue / cyanoacrylate adhesives. Instructions 1. Apply a few drops of Debonder 21 to the surfaces to be cleaned using the supplied brush

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml