Products tagged with Mark Minitools

Miter cutter

Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc.

Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened)

Dimension: 210mm x 210mm

Cutting length blad

Diamond Burs + diamond disks - 25 parts

18 Diamond Burs
5 diamond disks (metal)
2 Holders
Base thicknes 3mm
Ideal for Proxxon, Demel and comparable machines.

Mini drills 10 st. 0.3-3.0 mm

Fretsaw

Fretsaw to be used to saw wood profiles, plastic and fine metals.

Triangle screwdriver bit set
1.8mm / 2.0mm / 2.3mm /2.7mm /3.0mm

often used to remove base plates from scale model cars

Mini Machinist Square

Size ca.20x25mm

Sandpaper file

3 Variants:
120 Grid
180 Grid
240 Grid

Single sanding belts also available

Colle 21 anaerobic cyanoacrylate glue - 21 gram

COLLE 21 is an ANAEROBIC glue, It works with pressure, which gives you the time to correctly position your assemblies. Assembly without the pressure of 2 surfaces. The pressure made (15 to 45 seconds) wil

Mini nutdriver set

3.0 / 3.5 / 4.0 / 4.5 / 5.0mm

Masking Tape
Acid free, leaves no glue residue
Length: 18 meter

Available sizes:
1mm
2mm
3mm
6mm
10mm

Blades for Hobby knifes and scalpel blades
Packed per 5 Pieces
Choose from drop-down list:
Hobby knife #1:A1, A2, A3, A4, A5
Hobby knife #2:B1, B2, B3, B4, B5

Scalpel handle 3&7:10,10A, 11, 12, 15
Scalpel handle 4:20

Humbrol Maskol
Humbrol Maskol is a liquid. when dried it looks like a kind of rubber film. This allows you to easily protect parts of your model when you are going to paint or for example want to apply camouflage. It is recommended not to leave the dried

Nail press 2mm / 3mm
A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place.
Make your choice:
Blue - for

Diamond Burs - 30 pieces in box

Base thicknes 3mm

Ideal for Proxxon, Demel and comparable machines.

Hand drill with chuck and rotating base

For drills from 0.3 - 2.5 mm

Razorblade saw
Ultra thin about 0.13mm thick razor saw.

Set consists of a handle with 2 saw blades.
Every saw blade has a fine and ultra fine toothing.
Cuts plastic, resin, wood, and soft metals.

Machinist Square

Size ca.57x77mm

Mini nutdriver
Please choose your size:
1.5mm
2.0mm
2.5mm
3.0mm
4.0mm
5.0mm
5.5mm

Sable brush, 3 sizes
0, 00 or 000

Precision Cutter

Miter sanding aid - angle sanding
The angle can be adjusted.
The handpiece has a slide (stop).
Comes with a set of 3 extra sanding belts:
150 Grid
240 Grid
320 Grid
Sanding belt set is also available separately.

Ideal for profiles in styrene, wo

Circular saws mini - 6pcs

Ideal for Proxxon, Dremel, etc.

Bending springs for tubes

For evenly bending brass, copper and tubes without kinking.

Beforehand, the part of the tube to be bent must be softened by heating it with a flame. Then let the tube cool down. After cooling, the bending can begin.

Meth

Drill set 2.35 mm Shank

0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm