Hand drill with chuck and rotating base For drills from 0.3 - 2.5 mm

Watchmakers tap set Taps and die in the following sizes: 0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm Holes should be pre-drilled 0.1mm smaller. Taps can be clamped in a drill chuck, for ex

Blades for Hobby knifes and scalpel blades Packed per 5 Pieces Choose from drop-down list: Hobby knife #1:A1, A2, A3, A4, A5 Hobby knife #2:B1, B2, B3, B4, B5 Scalpel handle 3&7:10,10A, 11, 12, 15 Scalpel handle 4:20

Precision hand vice One side has a horizontal and vertical groove for clamping round materials. With sturdy wooden handle (hexagon) for good grip. Jaw width: 10mm Usable jaw depth: 18mm Max. Opening: 14mm

Diamond Burs + diamond disks - 25 parts 18 Diamond Burs 5 diamond disks (metal) 2 Holders Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Polystyrene cutter / Foam Cutter / 3 in 1 set Ideal for cutting and processing polystyrene, tempex and foam. Supplied with power supply, support, spare cutting wire and 3 different attachments: - to cut - to model - for soldering

Glass fibre cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Photo Etched parts Bender (Small) with two bending aids. Has been specially developed for model building using photo etch parts allowing the brass to be held and bent accurately into many different shapes. Measures 59mm x 59mm

Watchmakers tap set Taps in the following sizes: M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5 Holes should be pre-drilled 0.1-0.4mm smaller. Taps can be clamped in a (mini) tap wrench.

Masking Tape Acid free, leaves no glue residue Length: 18 meter Available sizes: 1mm 2mm 3mm 6mm 10mm

Doming punch set with doming block 12 doming punches in the sizes: 2.3 - 3.5 - 4.3 - 5.1 - 5.9 - 6.7 - 7.5 - 8.3 - 9.1 - 9.9 - 10.7 - 11.5mm. Manufactured from hardened tool steel Doming block: Manufactured from hardened and polished tool steel

Polystyrene Cutter / Foam Cutter - USB Ideal for cutting and processing polystyrene, tempex and foam. To be used with a USB charger, for example from the mob. telephone. Comes with metal support.

Miter sanding aid - angle sanding The angle can be adjusted. The handpiece has a slide (stop). Comes with a set of 3 extra sanding belts: 150 Grid 240 Grid 320 Grid Sanding belt set is also available separately. Ideal for profiles in styrene, wood and me

Drill set 2.35 mm Shank 0.6mm, 0.7mm, 0.8mm, 0.9mm, 1.0mm, 1.2mm, 1.5mm, 1.8mm, 2.0mm, 2.3mm

Diamond disk 50mm - Metal With holder Ideal for Proxxon, Demel and comparable machines.

Sandpaper file 3 Variants: 120 Grid 180 Grid 240 Grid Single sanding belts also available

Diamond Burs - 30 pieces in box Base thicknes 3mm Ideal for Proxxon, Demel and comparable machines.

Needle nose pliers bent fine

Humbrol Maskol Humbrol Maskol is a liquid. when dried it looks like a kind of rubber film. This allows you to easily protect parts of your model when you are going to paint or for example want to apply camouflage. It is recommended not to leave the dried

Mitre box For small tubes and rods 45 and 90 degree sawing with adjustable stop

Miter cutter Ideal for miter cutting (multi angle) of small profiles and strips of wood, plastic, styrene, etc. Comes with 2 sheffield carbon steel blades. (1x single sharpened, 1x double sharpened) Dimension: 210mm x 210mm Cutting length blade 50mm

Mini vise Jaw width 40mm Maximum opening: 30 mm Can be mounted on the table with the screw holes.

Extra long mini Drill Set 0.5/0.7/1.0/1.5/2.5mm Approx. 100 mm long

Fretsaw Fretsaw to be used to saw wood profiles, plastic and fine metals.