Products tagged with thread

Watchmakers tap set
Taps in the following sizes:
M1 / M1,2 / M1,4 / M1,6 / M1,8 / M2 / M2.5 / M3 / M3.5
Holes should be pre-drilled 0.1-0.4mm smaller.
Taps can be clamped in a (mini) tap wrench.

Watchmakers tap set
Taps and die in the following sizes:
0,7mm / 0,8mm / 0,9mm / 1.0mm / 1.1mm / 1.2mm / 1.3mm / 1.4mm / 1.5mm / 1.6mm / 1.7mm / 1.8mm / 1.9mm / 2.0 mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, fo

Watchmakers tap set
Taps and die in the following sizes:
0.6mm / 0.7mm / 0.8mm / 0.9mm / 1.0mm
Holes should be pre-drilled 0.1mm smaller.
Taps can be clamped in a drill chuck, for example: https://www.marks-miniatures.com/en/hand-drill-with-chuck-and-

Tap Wrench Mini
Square: 2,1-6,0mm
Length approx. 11 cm

Tap Wrench M1-M10
M1-M10
Square: 2,1-8,0mm
Lenght approx. 18 cm

Extra thin cement - plastic glue

Glue for plastic scale model kits.
Apply the glue to the parts and then hold them together.
Capillary action causes the glue to draw between openings on its own.

This glue dries completely within 10 minutes; comes

Extra thin cement - plastic glue - Blue

The blue color provides extra visibility so that glue residues can be easily removed

Glue for plastic scale model kits.
Apply the glue to the parts and then hold them together.
Capillary action causes the gl

Colle 21 Thread Locking Agent - 50ml

Prevents loosening of bolts and nuts caused by vibration.
Prevention of rust and corrosion
Removable: Can be removed with hand tools.
Curing: 10 minutes and fully cured in 24 hours.