Products tagged with schleif

Glass fibre cleaning pin

For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates.

In plastic modelling used to sand over applied glue on models.
When in use, only the tip of the...

Mini milling, engraving and drilling machine - Battery-Rechargeable USB

Very handy machine. Speed ​​is adjustable 5,000 - 10,000 - 15,000 R.P.M. and therefore extremely suitable for scale modelling and fine working.

Ideal for processing plastics, wo

Modelling Supplies needle files 10 pieces

Set files, 10 pieces different shapes

Fine Files
Standard Quality

Length: 140 mm

Curved files 10 pieces

Set files, 10 pieces different shapes
Ideal for hard to reach areas
Length approx. 140 mm

Needle files set 100mm mini - 12 pcs.

Files are 100 mm long.

Diamond files Special shapes Set 10 pcs.

Brass Brush cleaning pin

For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates.

In plastic modelling used to sand over applied glue on models.
When in use, only the tip of the...

Mini sanding drum set - 12 pcs.

5x sanding sleeve 80 grit Ø12.7mm + 1 holder
5x Sanding sleeve 80 grit Ø6.3mm +1 holder
Shaft/pin thickness 3.1mm

Ideal for Proxxon, Dremel and similar devices.

Needle files set 100mm mini - 10 pcs.

Files are 100 mm long.

Steel Brush cleaning pin

For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates.

In plastic modelling used to sand over applied glue on models.
When in use, only the tip of the...

Polishing File - 1200/1400/1600 grit

approx. 18cm long

Needle files set 100mm mini Diamond- 5pcs.

Sandpaper file - 100/180 grit

approx. 18cm long

scraper/knife

9-piece grinding disc set
Silicon carbide grinding wheels, with a width of 3mm, for sharpening, grinding, deburring, rust removal and sanding, etc. Can be used on metal, alloys, ceramics, tiles, stone, glass, plastic, fiberglass and wood. Compatible with

18-piece grinding disc set.
Resin bonded aluminum oxide discs for grinding, cutting and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other grinder machines.
Cutting disk is 0,6mm strong
Cont

Warding file set - 5 Pcs.

Length without handle 100 mm. Total length 170 mm. Contents: flat, round, square, triangle en halfround.

Brass Brush

for cleaning various surfaces

Nylon Brush

for cleaning various surfaces

6-piece grinding disc set - approx. 1 mm wide.
Resin bonded aluminum oxide grinding wheels for cutting, grinding and deburring. Can be used on metal, alloys, plastic, fiberglass and wood. To be used with Proxxon, Dremel and other milling machines. Conten

Needle files set 100mm mini - 5 pcs.

Files are 100 mm long.

7-piece rubber grinding discs set - slightly abrasive
Rubber grinding wheels for cleaning and polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. Can be used on Proxxon, dremel and other milling machines. Disc size 3.2x22mm
C

Needle file set - 3 Pcs.

6-piece rubber polishing burr set
Rubber polishing points for finishing and for polishing metal, alloys, ceramics, tiles, stone, glass, plastic and fiberglass. To be used with Proxxon, Dremel and other milling machines.
Width of the tips approx. 6mm.
C