Magnifying glasses with 3 glasses Magnifying: 1.5x, 2.5x, 3.5x

Drill Set 1.05 mm - 2.00 mm - HSS 15 HSS drills from 1.05mm increasing with 0.05mm till 2.00mm. Packed in pouch

Steel ruler 50cm, rigid First 10cm scaled with an additional 1 / 2mm division, Rear scaling in inches and provided with a hole for hanging.

Sandpaper file 100/180 grit curved Side 1: 100 grit Side 2: 180 grit 19mm wide 5mm thick with foam filling Approx. 18cm long.

Professional Scalpel handle no.4 Swann Morton (without blade)

Cross Tweezer curved on stand - heat resistant Selfholding Tweezer. Hols small objects by itself

Machinist Square with stop Size ca.50x75mm

Spring divider large For circles up to 31,5cm

scraper/knife

Hand Vice deluxe Vice: Aluminium Handpiece: wood Pins: 8 Normal objects can be clamped between the two halfs. The Pins could be used to clamb round and uneven objects. Maximum opening halfs:18mm Maximum opening between pins:51mm

Nail press 2mm / 3mm A nail press is the solution if you need to hammer small nails and nails into a delicate surface. Or if it is dangerous to use a hammer. The nail press has a magnetic head that holds the nail in place. Make your choice: Blue - for nai

Double hand drill / vice - US Model Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes)

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Diamond Burs  Spherical - 15 pcs. 4 x Ø 1,5 mm 4 x Ø 2,0 mm 3 x Ø 3,0 mm 2 x Ø 4,0 mm 2 x Ø 5,0 mm Ideal for Proxxon, Dremel and comparable machines.

scraping-knife For scaping and deflash plastics and metals.

Machinist Square Size ca.57x77mm

Hand drill with rotating base Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes) When drilling, the other collet is stored inside the shaft.

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Hobby Line Engraver for making panel lines (seams) in plastic

Digital Caliper - 150mm 0.01mm

Steel Brush cleaning pin For cleaning the connection areas on circuit boards, cleaning contacts of all kinds, removing residues on metal templates. In plastic modelling used to sand over applied glue on models. When in use, only the tip of the...

Hammer with 6 changeable heads 1x Flat - Synthetic 1x Flat - Brass 1x Flat - Steel 1x Rivet - Steel 1x Ball - Steel 1x Round - Steel

Hand drill with spring - Large With extra collet For drills from 0.3-1.5mm