Hand drill with rotating base Length: ca. 9cm For drills from 0.3 - 3.0 mm with 2 double collets (=4 different sizes) When drilling, the other collet is stored inside the shaft.

Colle 21 - Primer 21 Can be used as a base layer for difficult to bond plastics such as PE, PP, PTFE, Glass, Plexyglass, polystyrene. Use Primer21 prior to gluing with Cyanoacrylate glue, Super Glue, or Colle21. Apply a thin layer of primer21 to the part

Xuron hard wire cutter Suitable for cutting hard wire, spring steel wire, piano wire, florists wire and even throttle cable. The pliers work like scissors so that the wire is not pinched. This keeps the ends of the wire straight. Cuts hard wire up to 1.

Xuron 90º curved pliers With smooth jaws Made in USA

Machinist Square with stop Size ca.50x75mm

Degree Protractor Premium Quality

Needle nose pliers bent fine

Mini Pipettes (7 pcs). Small pipetes, ideal for paints and fluids.

Brass Vice

Cross Tweezer Bent Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With bent tips Material: Stainless Steel Premium Quality

Double hand drill / vice Length: ca. 9cm For drills from 0.3 - 2.4 mm with 2 double collets (=4 different sizes) with 2 double collets (=4 different sizes)

Parallel clamp 50mm Can apply pressure to your workpiece along its entire length, or aimed at a specific point. Total length of the jaw: 50mm - Usable jaw length: 20mm (the part of the jaw that is in front of the spindles) - Clamping range in the width:

Xuron Track Cutter

Fret Crowning File

Modelling pencil - silicon tip 5 pcs. Choose from: Medium density - 3mm tip (grey) Medium density - 6mm tip (grey) High density - 3 mm tip (black)

Mini clamp

Syringes - 2pcs. To applicate liquids like glue, paint, etc. Packed per 2: 1x2ml 1x5ml

Colle 21 - Debonder21 Solvent for Cyanoacrylate Super Glue Adhesive The ideal product for cleaning and loosening superglue / cyanoacrylate adhesives. Instructions 1. Apply a few drops of Debonder 21 to the surfaces to be cleaned using the supplied brush

Mini sanding drum set - 12 pcs. 5x sanding sleeve 80 grit Ø12.7mm + 1 holder 5x Sanding sleeve 80 grit Ø6.3mm +1 holder Shaft/pin thickness 3.1mm Ideal for Proxxon, Dremel and similar devices.

Palette Knife Set 5 different palette knives. Flexible stainless steel spatulas with wooden handle

Scriber used for marking metals and plastics. also usable as center punch

Handvice Opening: 0-1.0 mm

Digital Caliper - 150mm 0.01mm

Machinist Square Size ca.68x102mm