Scriber used for marking plastics, wood, etc.

Machinist Square Size ca.68x102mm

Nylon Brush for cleaning various surfaces

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips Material: Stainless Steel Premium Quality

Cross Tweezer straight narrow Tips - Stainless Steel Selfholding Tweezer. Hols small objects by itself With straight narrow Tips under small angle Material: Stainless Steel Premium Quality

Ruler - metal Scale: mm and inch Reach: 15,5 cm / 6 inch

Mini Tweezer straight 8cm - narrow tips With mini tweezers you can work closer to objects to have better control. Material: Stainless Steel Standard Quality

Compass cutter 10 - 150mm 6 spare blades

Tweezer Bent Tips - Stainless Steel Material: Stainless Steel Premium Quality

Tube cutter / Pipe cutter 3-22mm To shorten copper and brass tubes / pipes. 

Knife pen form 4 mm with 1 blade

Needle files set 100mm mini - 10 pcs. Files are 100 mm long.

Scriber used for marking metals and plastics. also usable as center punch

scraper/knife

Polishing File - Mini 1200/1600 grit approx. 9cm long

Milliput is one of the best known epoxy putty products for modeling. Milliput also consists of two components and by mixing well (5 min. Good kneading) the material will slowly harden, after which it is fully cured after 3 hours. By keeping the putty cool

Airbrush connector: male thread G1/8 - male thread G1/8

Cutting Mat din A4 (300x220mm) Rasterized cm2 5 ply - Heavy quality Self-repairing; the cut closes by itself, leaving the surface of the cutting mat nice and smooth

Flat brush

Magnifying glasses with LED lighting 1.0x, 1.5x, 2.0x, 2.5x, 3.5x Magnifying glasses with 5 interchangeable lenses and 2 LEDs - LED light switchable and pivotable - Glasses arms can be replaced by a headband - Interchangeable lens magnification: 1x, 1.5x

Solder tin wire - 0.5 mm, lead free Sn 99.3 Cu0.7 - Rosin Core 10 gram

Sandpaper file 100/180 grit curved Side 1: 100 grit Side 2: 180 grit 19mm wide 5mm thick with foam filling Approx. 18cm long.

Modelling Wax Hard Extremeley low oil concentration (making gluing and painting no problem). Ideal for easy filling of seams and holes in scalemodels and figures of various materials such as plastic, resin metal, etc. Hard variant - Suitable for small an

Carbide steel bur - Arch pointed nose 3,2x38mm Industry Quality Ideal for Proxxon, Dremel and comparable machines with a 3,2mm collet